Success through Synergy

Scales and Coaters

SDBY-Z Balk
Material Scale

SDBY-F-Quantitative-packing scale

SDBY-II(S)
packing scale

SDBY-II
packing scale

Clearance conveying, static metering, and optional cumulative or batch quantitative modes.

Closed weighing structure reduces dust leakage and improves working condition.

The metering hopper and buffer hopper are lined with wear-resistant layer to improve the service life of the equipment.

Reasonable air balance system further improves the accuracy of weighing.

Receiving/delivering function, automatic calibration function.

Excellent data management and report printing.

Computer interface output.

Data can be collected into computer system, automatically counting the weight, bag number, error of each finished product, and the data can be entered into ERP system.

SDBY-P-Quantitative-packer

Widely used for flow control and rated packaging in many industries like feed, grain, port storage, cement, chemical industry, building materials and so on.

With the special meter for packing and weighing as the core and the logic combination of programmable logic controller, precise weight sensor outputs weight detecting signal to complete the bag clamping, fast/slow feeding, etc., to realize the weight packaging of different specifications.

Suitable feeding mechanism ensures the rapid flow of materials. All parameters are input by the panel. Automatic control of fast and slow feeding, bag clamping and bag loosening. →

Gross weight and net weight displayed at the same time by the intelligent weighing meter.

Remove tare weight automatically. Automatic tracking, automatic detection and correction of weighing errors.

Accumulated bag number display. The whole system is equipped with air suction port to control dust and improve the working condition.

Data can be collected into the computer system, automatically counting the weight, bag number, error of each finished product, and the data can be entered into ERP system.

SYPG 850M
Drum Type
Lequid Coater

 

  • Excellent afterward adding technology can effectively supplement the loss of nutrition in the pelleting process, and spray the pellet surface with oil, enzyme, vitamin, organic acid, microorganism and so on.
  • The spray liquid is fine and in full contact with the pellet surface with high uniformity.
  • Large door structure, convenient and efficient for cleaning the drum.
  • Special sealing, no dust and oil leakage, ensure the environment clean and tidy.
  • Automatic control of the addition with more accurate measurement.
  • The pellets have balanced nutrition, more palatability and disease resistance.

Door Cover Coater Of
Pellet Mill

  • The high-pressure nozzle is installed on the door cover, and the liquid from the nozzle is in full contact with the feed surface to ensure the uniform rate of feed spraying, and the water-resistant, absorption rate of the feed.
  • The touch screen can display the total amount, theoretical flow and instantaneous flow.
  • Volume of addition and aerometer can be set by touch screen and stored in memory.
  • All setting parameters are provided with power off protection.
  • Both manual and automatic functions, to ensure that the microcomputer works properly even if it breaks down.
  • Built-in PLC, automatic control gear pump speed and combination of sprayers.
  • Automatically detect the feed output, generate production parameters, and automatically adjust the amount of added liquid according to the set proportion.
  • Spray pressure and amount can be automatically changed by the working frequency of gear pump.
  • The liquid heating device is optional allowing animal fat to be sprayed in lower temperature environments.
  • High precision flowmeter and anti-interference ability of the transformer amplifier, to ensure addition accuracy.

ZC-SYPL Automatic Afterwards Oil Coater

  • ZhengChang fuzzy control technology is adopted to automatically control the oil addition according to the flow rate of the pellet and the set proportion of oil addition.
  • The system is designed with accurate balance to automatically detect the flow of materials, and equipped with high-precision liquid weighing scale to ensure the accuracy of oil measurement.
  • The belt conveyor is adopted to improve the evenness of oil spraying and avoid agglomeration caused by nozzle dripping.
  • The belt conveyor has a scraper between each pitch to adjust the gap between the conveyor and the drum to reduce the residue of feed.
  • Low installation height, compact structure, saving investment cost and installation space.
  • High-performance atomizing nozzle is adopted to ensure good atomization effect.
  • Micro-liquid spraying nozzle is reserved, which can spray both oil and micro-liquid on the surface of feed at the same time.
  • The finished product has good smoothness, low powder content and beautiful appearance.
  • The control system has the function of spraying oil and micro-liquid at the same time.

SSHJ 2z Paddle Type Vacuum Coating

  • Two bevel gear reducers drive two rotors respectively with high driving efficiency.
  • Special shaft-end seal, reliable vacuum airtight performance. The internal cavity pressure can be below 60kPa within 1min, and rise ≤ 5kPa after vacuuming within 10min.
  • Multi-path sprayers make good atomization effect. Easy to dismantle and maintain sprayers.
  • Stainless steel is used for parts exposed to raw materials, to ensure the stability of pellets.
  • The unique design rotor and discharge door reduce the crumbing rate of pellets.
  • Ensure the accuracy and evenness of coating, greatly increase the adding amount of liquid.
  • Two kinds of liquid can be added into aquatic and pet food with a ratio of 1%-30%, powder is also available for adding.
  • Oil seeps into the pellets, preventing moisture from entering, so that keep pellets dry for easy storage.

SYTVc series Weighing Type Oil Adding Equipment

  • It is used for weighing the oil in batches and conveying a certain amount of oil to the mixer with an accuracy ≤ 0.3%.
  • Each inlet of the adding system is equipped with a solenoid valve to control the opening and closing of the oil circuit. Multi-way oil enters the upper tank through the inlet for weighing. After weighing, the pneumatic ball valve at the bottom will be opened, the oil enters the lower tank, and it will be conveyed by the gear pump to the mixer for material spraying.
  • It is synchronized with the batching system, and the oil data is entered into the report system, which can be connected with ERP.

SYTVb series Batch Type Oil Adding System

  • It is used for batch mixer to add oil or other liquid.
  • The system can add oil automatically by using high precision flowmeter, the user only needs to enter the adding amount and the symbol, precision ≤ 1%.
  • It is widely used in feed, food and pharmaceutical industry.
  • The 10.4-inch touch screen is used as the man-machine interface to display various variables and working process.
  • There are three working methods: automatic, manual and stop, the system is fully automatic from the start to the end without manual intervention.
  • Fuzzy logic control algorithm is used to automatically control the amount of molasses and keep the proportion stable.
  • The molasses is heated by water to prevent the molasses from coking.
  • Molasses pipes are designed with thermostatic and electric tropical insulation to prevent molasses condensation due to temperature changes.
  • Ensure good uniformity of molasses addition without agglomeration.
  • Imported high-grade nozzle is adopted for cross-type and three-dimensional spraying, molasses addition is efficient and even.

SZCSJK Feed Quality Optimization System

  • Improve feed quality, texture, appearance, taste, energy, density, etc.
  • Reduce labour cost, improve production efficiency, realise one person to operate multiple pellet mills, increase the output of about 10%.
  • Energy saving, realize real-time control of air volume of cooling fan through frequency conversion control.
  • The management level is improved, all kinds of data reports are provided, which is convenient to control the production situation in time.
  • Timely detect and supplement the moisture to ensure the moisture content of finished feed is consistent.